Table of Contents
Advertisement
Overview
About this document
This document contains cable configuration information for HPE MSA 2050 controller enclosures and
supported expansion disk enclosures. The information is for the person who installs, administers, and
troubleshoots servers and storage systems. HPE assumes that you are qualified in servicing and installing
computer equipment, and are trained in recognizing hazards in products and hazardous energy levels.
For complete information on installing and configuring your product, see the user guide provided with your
HPE MSA 2050. User documents are provided on the HPE MSA 2050 support website and with the product.
For the latest version of a document, see the HPE MSA 2050 support website: http://www.hpe.com/
support/msa2050.
Complete system example
The following figure shows an example of a dual-controller, direct-connect enclosure configuration with two
servers accessing the storage.
Two servers are direct-connected to a dual-controller HPE MSA 2050 array. The MSA 2050 array is in turn
connected to two dual-I/O module HPE MSA 2050 6Gb 3.5" large form factor (LFF) or 2.5" small form factor
(SFF) enclosures using Mini-SAS to Mini-SAS cables.
4
Overview
1
2
3
4
5
Hide quick links:
Advertisement
Table of Contents
