View Port Information; View Slpr Information - HPE XP7 User Manual

Screen elements
RG(s)
ACP Pair

View port information

Click a CHP Port ID value in the LDEV table to view the Port Information window.
The DKC serial number is displayed. In addition, the port type, such as Fibre or FCoE (applicable only for
P9500/XP7 disk arrays) is also displayed for the respective CHIP port ID.
Click the IO/s Charts or MB/s Charts to view the respective charts.
IMPORTANT:
• The LDEV table does not display hyperlinks in the ACP Pair ID and ACP Pair Util fields for
RAID Groups spanning across multiple ACP pairs. Hence, no chart for the same can be created.
• An XP24000 type array has 32 CHIPs, 8 ACP pairs, and 4 MPs per port, an XP20000 type array
has 8 CHIPs, 4 ACPs and 4 MPs per port.
• All virtual volumes that are not associated with any pool, do not have RAID Group information,
and of unknown type, are considered as a single non-existing (virtual) volume group. This single
non-existing (virtual) volume group is denoted as VVol-Grp in the RG column in the LDEV table
and Performance data is collected for all these volumes.

View SLPR information

IMPORTANT:
SLPR does not exist in P9500/XP7 disk array.
Click an SLPR value in the LDEV table to view the detail view for that SLPR in a separate browser
window. In the SLPR window, the line above the table indicates the hierarchical information of the
selected SLPR. The SLPR view includes two tabs, the CLPR tab and the Ports tab.
The CLPR tab displays the following details for each CLPR in the selected SLPR:
• Cache size
• Write pending data
• Sidefile usage data
• Read hits data
Click a CLPR to view the associated details. For more information, see CLPR detail view.
The Ports tab displays the following details for each port associated with the selected SLPR:
• Maximum IO/s
• Average IO/s
Description
The RAID Group of the real LDEV.
The ACP pair that manages the real LDEV.
View port information 227