Threshold Settings; About Threshold Settings; Threshold Settings Screen Details For Xp And P9500/Xp7 Disk Arrays - HPE XP7 User Manual

Threshold settings

I want to ...
• Edit threshold duration on page 130
• Set threshold limits for XP and XP7 disk
arrays on page 131

About Threshold settings

Threshold level is a value that you set and further used by PA to compare the current performance value
of a selected component with the set threshold value. The health status for components are dependent
on the thresholds that you set for the corresponding metrics in the Threshold Setting screen. The status
for components change to the critical state if performance values for the related metrics cross the
threshold level at least once, the status changes to Warning if performance values have crossed 95% of
the threshold value but is within 100% of the threshold value, the components appears in Normal state if
performance values for the corresponding metrics are less than 95% of threshold values set.
If you have not set the threshold limit for even one metric in a category, the Unknown status icon
appears in that category in the XP/XP7Array Health section.
In addition, the average usage summary for components is also derived from the set threshold duration
and verified against the threshold limits set for metrics in the particular category. Thereafter, the statistics
are displayed on the Dashboard screen.
IMPORTANT:
• The average usage of components is monitored for those categories where threshold limits are
set for the corresponding metrics. If either the XP, XP7 disk arrays are monitored, only the
threshold settings table for the monitored array type is displayed.
• You can graph the usage details for components in the chart work area in the detail pane for
individual components, and also view the X busiest components in the Component Status
Dashboard.
Threshold settings screen details for XP and P9500/XP7
disk arrays
IMPORTANT:
If any of the below metrics exceeds the defined threshold limit, the status for these metrics changes
to Critical
124 Threshold settings
. As a result, the status of the corresponding component also changes to critical.
Learn more
• About Threshold settings on page 124
• Threshold settings screen details for XP and
P9500/XP7 disk arrays on page 124