View Thp Pool Occupancy Information - HPE XP7 User Manual

• Usage: % full of the journal group
• Qmarker: Current data address being transferred, indicates the latest seq# for writing to the P-Vols
CTGroup at the PAIR state.
• Qcnt: Pending writes, shows the remaining total Qmarker within the journal data.
If there are no associated continuous access journal groups configured, – is displayed in the Jrnl Grp
column.

View ThP Pool Occupancy information

The ThP volumes that belong to a ThP Pool are displayed as THP-PID(<poolid>)and snapshot
volumes that belong to a snapshot pool are represented as Snap-PID(<pool id>), under RAIDGroup
in the LDEV table. Click a THP-PID(<poolid>) to view the ThP pool occupancy information, which
includes the mapping between the pool volumes (real LDEVs) and the V-VOLs.
Screen elements
THP Pool ID
THP Pool Status
POOL Threshold 1
POOL Threshold 2
THP Pool capacity
THP Pool unused capacity
VVOL ID
VVOL Threshold (%)
VVOL Capacity (MB)
REAL LDEV
226 View ThP Pool Occupancy information
Description
The ID of the pool (pool number)
The status of the ThP Pool
• 0: Undefined/Creating/Deleting – Specified pool does not exist
completely.
• 1: Normal
• 2: Pool capacity beyond threshold
• 3: Pool capacity reached 100% of the pool
• 4: Failure, cannot show further information for the pool
A user configurable pool threshold (varying between 5% - 95% in
increments of 5%). The default value is 70%. This is the high for
the pool.
The threshold level that indicates the WARNING level for the pool.
This value is always 80% and cannot be changed.
The total capacity of all the ThP volumes in the pool.
The available capacity for the ThP pool.
The CU:LDEV identifier for the virtual volume (V-VOL).
The threshold set for the V-VOL in ThP pool.
The capacity of the virtual volume (in MB).
The physical LDEV that is part of the pool.
Table Continued