missing data points for components in the subsequent collection cycle before PA starts collecting data for
the new set of components and frequency.
Procedure
1. From the main menu, click Collections.
2. In the Config and Performance Collection table, select the array record for which you want to modify
the associated performance data collection schedule.
3. Click Create/Edit Perf.
The schedule details appear and the selected components are displayed in the respective component
type boxes.
4. Modify the schedule settings as required.
5. To commit the changes, click Create.
The updated frequency is displayed under Frequency. In the subsequent data collection cycle, HPE XP7
Performance Advisor collects data for the new set of components as per the new frequency.
Stop performance data collection schedules
In the Config and Performance Collection table, select the XP/XP7 disk array record, and click Stop
Perf.
PA stops the collection from the next collection cycle. The current performance data collection schedule
stops only after the current data collection is complete, as per the selected collection schedule. For
example, if you had configured an hourly collection at 11:00 a.m and stopped the schedule at 11:30 a.m.,
the current performance data collection still continues as per the selected collection schedule and ends
only at 12:00 p.m. Further data collections are not performed till you restart the schedule. The status icon
displays the indication that performance collection schedule has stopped for the selected array record.
NOTE:
To restart a performance data collection schedule click Start. PA resumes the data collection for the
same set frequency on the selected array components, and the status icon appears in green.
Delete performance data collection schedules
Select the XP/XP7 disk array record, and click Delete Perf.
The performance data collection schedule is permanently deleted.
Stop performance data collection schedules
107