components and metrics. You can also monitor real-time data, plot trend values for all the charts, and plot
forecast lines for critical metrics to predict behavior within a specified time frame.
Continuous Access screen details
Screen elements
Filters
Arrays
Pair Status
CA Link Status
Master pane details
Pair Status
Primary DKC
PVOL
PVOL Host Port
Secondary DKC
246
Continuous Access screen details
Description
Displays all the arrays that PA monitors.
Displays the records which have the CA Pair Status as Ok,
Warning, Critical or Unknown.
Displays the CA link of all statuses by default. The status
displays as critical if the CA Link is down.
Current replication link status of the P-VOL or S-VOL on the
selected array. The replication link status shown is corresponding
to the continuous access transactions happening on the selected
array, and can be one of the following:
•
SMPL
•
COPY
•
PAIRED
•
Pair Suspendx
•
Pair Suspend Error
•
Pair DUB
•
Reverse Copy
•
Pair SideFile 30% over
•
Pair SideFile over Suspend
•
SVOL Swap ready Suspend
•
Unknown
Serial number of the primary disk array (primary data center).
LDEV configured as P-VOL on the primary data center. Displays
the LDEV number in cu:LDEV format.
Host port assigned for the P-VOL.
Serial number of the secondary array.
Table Continued