HPE XP7 User Manual page 207

Column names
Disk Type
Pool LDEVs
• The maximum number of VVol records you want to view.
NOTE: HPE recommends viewing a maximum of 150 records at a time, so that there is no
performance impact.
• The metrics based on which you want to sort the records. You can sort records based on the IOPS,
MBPS, Backend Tracks, and the Avg Read/Write Resp Time metrics. By default, the VVol records are
sorted based on the Avg Read/Write Resp Time values.
To configure the above-mentioned settings, click V-vols Settings in the Pool <Pool ID> Details table.
An informational message on the VVol settings that you configured appears under the Pool <Pool ID>
Details table header. For example, if you selected a maximum number of 30 VVol records and the sorting
to be based on the IOPS, the following informational message appears: Top 30 Pool V-volumes sort by
IOPS.
View Smart pool capacity
You can view the capacity details for a Smart pool. Click a record in the Pool Tiers pane to view the
following details:
Description
Displays disk type of a particular RAID Group. For External RAID
Group this column is blank.
Displays the individual pool volumes from the RAID Group that
are included in the Smart pool or the ThP pool.
Summary view 207