Chip Utilization Report; Chip Utilization By Hour Of The Day Report - HPE XP7 User Manual

CHIP utilization report

IMPORTANT:
The utilization metrics on the CHIP/CHA MPs are not displayed for the P9500/XP7 disk arrays. They
are included as part of the utilization metrics displayed for the MP blades in the P9500/XP7 disk
arrays.
The CHIP utilization reports allow you to view in a chart format, the utilization data for all the installed
CHIPs/CHAs in the array, and the average utilization data for all the installed CHIPs/CHAs in an XP disk
array. While generating a CHIP utilization report, you can select one or more CHIPs from the Available
CHIPs list.
If you select All and set the long duration, HPE XP7 Performance Advisor takes more time to generate
the reports. HPE recommends that you select few CHIPs when the duration is long.
A sample of each report is given below:
CHIP Utilization report
The CHIP Utilization report displays in a chart format, the utilization data for all the installed CHIPs/CHAs
in an XP disk array.
Figure 35: CHIP Utilization on page 321 displays a sample CHIP Utilization report for an XP24000 Disk
Array.
Figure 35: CHIP Utilization

CHIP Utilization by Hour of the Day report

The CHIP Utilization by Hour of the Day report displays in a chart format, the utilization data for all the
installed CHIPs/CHAs in the array averaged over a 24-hour period. Figure 35: CHIP Utilization on page
321displays a sample CHIP Utilization by Hour of the Day report for an XP24000 Disk Array.
CHIP utilization report 321