HPE XP7 User Manual page 269

Report Description
types
Front End The frontend port utilization comprises of
Port the following reports:
Utilization
• Maximum Port IO
• Minimum Port IO
• Average Port IO
• Average Port MB
• Maximum Port MB
• Minimum Port MB
All The All report consolidates and provides
the above-mentioned reports in a single
report for the selected date and time range:
IMPORTANT:
The LDEV Activity report is not
included in the All report.
To view sample reports for the above-mentioned report types, see Sample reports.
IMPORTANT:
• Reports on the following are available only if they are configured in the selected XP or XP7 disk
array. If not configured, they are not even displayed as options to select for create their reports.
In addition, they are also not displayed in other related reports, like the Array Performance and
the All reports.
◦ Journal Pool Utilization
◦ ThP Pool Occupancy
◦ Snapshot Pool Occupancy
• In the report that you create, PA plots the data for a maximum of eight components in each chart
that is displayed in the report. For example, if you want to view the LDEV IO report for the 64
busiest LDEVs, PA provides a single report that includes eight charts. Each chart accommodates
data for a maximum of eight LDEVs.
For XP disk arrays
Yes
Yes
NOTE: The MP
Blade utilization data
is not applicable for
the XP disk arrays.
So, the MP Blade
Utilization report is
not included in the
All report generated
for the XP disk
arrays.
For P9500/XP7 disk
arrays
Yes
Yes
NOTE: The
ACP/DKA and
the CHIP/CHA
utilization data
are not
applicable for
the XP7 disk
arrays. So, their
reports are not
included in the
All report
generated for
the XP7 disk
arrays.
Reports 269