HPE XP7 User Manual page 61

The Hewlett Packard Enterprise Authorization Center license key web page appears.
2. Click Generate a License Key in the Main Menu section.
The Generate License Key screen appears.
3. Enter the registration number in the Registration Number or Product Authorization Key box.
Ensure that the registration number is same as that mentioned in the product entitlement certificate.
4. Click Next >>.
The Array information input screen appears. The following details are displayed:
• Registration number
• PA base license
• Additional PA LTU that you purchased
• Internal raw disk capacity or physical usable capacity that the LTU supports
5. Provide the following details on the Array information input screen:
• Enter the Array DKC serial number, which is a five digit number, such as 10900, 53036.
• Select the Hardware platform from the list.
The supported XP7 disk array and the XP disk array models, such as P9500, XP24000, XP20000,
XP12000, XP10000 are displayed for selection.
6. Click Next >>.
The Requestor Information screen appears.
7. Provide the requestor and the company related information, and click Next >>.
The Requestor Information screen appears again with all the details that you provided.
8. Click Next >> to confirm the details.
The Certificate screen appears and provides the license details. You can do the following on the
Certificate screen.
• Click Save to print a copy of the certificate.
• Click Keyfile to save the license file as a .dat file on your system.
• Click Email to send a copy of the license certificate and the key file to the intended recipient.
After installing the Permanent license for an XP disk array, if you want PA to monitor internal raw disk
capacity beyond the Permanent licensed capacity, generate another Permanent license at the HPEAC
website.
Similarly, after installing the Permanent license for an XP7 disk array, if you want PA to monitor physical
usable capacity beyond the Permanent licensed capacity, you can generate another Permanent license or
a Meter based Term license at the HPEAC website.
The procedure to generate and add the Meter based Term license is similar to the above procedure for
Permanent license. While generating a Meter based Term license, you can select the TB-Days that you
want to use when entering the registration number. For example, if you have a Meter based Term LTU for
100TB-Days and you want to use only 25TB-Days, enter 25 as the TB-Days. You are provided a license
key that can be used for 25TB-Days. You can use the remaining 75TB-Days later for the same or a
PA Licenses 61