Reset Counters Interface Loopback; Reset Counters Interface Null - HP MSR series Command Reference Manual

Usage guidelines
A device has only one null interface, always named interface Null 0. Interface Null 0 is always up. You
cannot remove it or shut it down.
Examples
# Enter Null 0 interface view.
<Sysname> system-view
[Sysname] interface null 0
[Sysname-NULL0]
Related commands
display interface null

reset counters interface loopback

Use reset counters interface loopback to clear statistics for a loopback interface.
Syntax
reset counters interface [ loopback [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
interface-number: Number of the loopback interface, which can be the number of any existing loopback
interface. With this argument, the command clears statistics on a specified loopback interface.
Usage guidelines
Clear the existing statistics on the interface before starting to collect new traffic statistics.
If you do not specify the loopback keyword, this command clears the statistics on all interfaces in the
system.
If you specify the loopback keyword without the interface-number argument, this command clears the
statistics on all loopback interfaces.
Examples
# Clear statistics on loopback interface Loopback 5.
<Sysname> reset counters interface loopback 5

reset counters interface null

Use reset counters interface null to clear statistics on the null interface.
Syntax
reset counters interface [ null [ 0 ] ]
Views
User view
326