Lldp Enable; Lldp Encapsulation Snap - HP 3600 v2 Series Command Reference Manual

Description
Use lldp compliance cdp to enable global CDP compatibility.
Use undo lldp compliance cdp to restore the default.
By default, CDP compatibility is globally disabled.
Because the maximum TTL allowed by CDP is 255 seconds, the TTL configuration must be no more than
255 seconds for CDP-compatible LLDP to operate with Cisco IP phones. The TTL configuration is the
product of the TTL multiplier and the LLDPDU transmit interval.
Related commands: lldp hold-multiplier and lldp timer tx-interval.
Examples
# Enable LLDP to be compatible with CDP globally.
<Sysname> system-view
[Sysname] lldp compliance cdp

lldp enable

Syntax
lldp enable
undo lldp enable
View
System view, Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Description
Use lldp enable to enable LLDP.
Use undo lldp enable to disable LLDP.
By default, LLDP is enabled on a port, and enabled globally.
LLDP takes effect on a port only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] undo lldp enable

lldp encapsulation snap

Syntax
lldp encapsulation snap
undo lldp encapsulation
252