Lldp Enable; Lldp Encapsulation Snap - HP 830 Command Reference Manual

<Sysname> system-view
[Sysname] lldp compliance cdp
Related commands
lldp hold-multiplier
•
lldp timer tx-interval
•

lldp enable

Use lldp enable to enable LLDP.
Use undo lldp enable to disable LLDP.
Syntax
lldp enable
undo lldp enable
Default
LLDP is enabled on a port and disabled globally.
Views
System view, Layer 2 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
LLDP takes effect on a port only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] undo lldp enable

lldp encapsulation snap

Use lldp encapsulation snap to configure the encapsulation format for LLDP frames as SNAP on a port or
a group of ports.
Use undo lldp encapsulation to restore the default encapsulation format for LLDP frames.
Syntax
lldp encapsulation snap
undo lldp encapsulation
Default
Ethernet II is the encapsulation format for LLDP frames.
Views
Layer 2 Ethernet interface view, port group view
118