Display The Acl Assignments For A Vlan - HP ProCurve 5300xl Series Management Manual

Access Control Lists (ACLs) for the Series 5300xl Switches
Displaying ACL Data
Note
9-50

Display the ACL Assignments for a VLAN

This command briefly lists the identification and type(s) of ACLs currently
assigned to a particular VLAN in the running-config file. (The switch allows
up to two ACL assignments per VLAN; one inbound and one outbound.)
Syntax:
show access-list vlan < vid >
List the ACLs assigned to a VLAN in the running config file.
This information also appears in the show running display. If you executed write
memory after configuring an ACL, it appears in the show config display.
For example, if you assigned a standard ACL with an ACL-ID of "1" to filter
inbound traffic on VLAN 10, you could quickly verify this assignment as
follows:
Figure 9-19. Example of Listing the ACL Assignments for a VLAN
Indicates that:
• A standard ACL with the ID of "1"
is assigned to filter inbound traffic
on VLAN 10.
• There is no ACL assignment to
filter outbound traffic on VLAN 10.