Display Qos Vlan-Policy - HP 6125XLG Command Reference Manual

Blade switch acl and qos command reference
Table of Contents

Advertisement

Policy: 1
Classifier: 1
Operator: AND
Rule(s) : If-match acl 2000
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)
Green action: pass
Yellow action: pass
Red action: discard
Green packets: 0 (Packets)
Red packets: 0 (Packets)
Classifier: 2
Operator: AND
Rule(s) : If-match protocol ipv6
Behavior: 2
Accounting Enable:
0 (Packets)
Filter Enable: Permit
Marking:
Remark dot1p 1
Table 23 Command output
Field
Direction
Green packets
Red packets
For the output description, see

display qos vlan-policy

Use display qos vlan-policy to display information about QoS policies applied to VLANs.
Syntax
display qos vlan-policy { name policy-name | vlan [ vlan-id ] } [ slot slot-number ] [ inbound | outbound ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
Direction in which the QoS policy is applied to the interface.
Traffic statistics for green packets.
Traffic statistics for red packets.
Table 16
and
Table
18.
59

Advertisement

Table of Contents
loading

Table of Contents