Recovery Mode; Special Key Combinations - Ricoh M0A0 Service Manual

Recovery Mode

The recovery mode menu is as follows. Ask your manager for details on how to enter Recovery mode.
Menu
reboot system now
apply update from
sdcard
wipe data/factory
reset
wipe cache
partition
wipe free area
partition
wipe LegacyUI area Deletes Legacy UI.
micon update from
sdcard

If [Update Firmware] is set to [Prohibit] in [System Settings] of the MFP, the control panel cannot enter the
recovery mode.

Ask your manager for information on how to enter the recovery Mode.

Special Key Combinations

This section describes special key combinations for operations which required combinations of hardware keys on the
previous models.
Function
SSP (Super Service)
mode login
Resetting User Tools
System Reset
Application Reset
Reboots the Android OS.
Updates the Cheetah System firmware by specifying the folder path.
Deletes all installed applications and all settings on the Cheetah.
Deletes all data that is stored on the cache partition. Currently, Cheetah does not use the
cache partition, so nothing happens when this menu item is accessed.
Deletes all data that is stored on the free partition. Cheetah stores the version history on the
free partition. When this menu item is selected, it will then disappear.
Updates Keymicon by specifying the folder path.
Operation for previous models
Login to SP mode, and then press an SP
mode item while holding down the [#] key.
In the User Tools screen, press a User Tools
category while holding down the [#] key.
Available for: System Settings,
Copier/Document Server Features, and
Scanner Features.
Hold down the [*] and [#] keys
simultaneously for 10 seconds.
Resets the controller software.
Hold down the [7] and [9] keys
simultaneously for 10 seconds.
Description
Operation for Smart Operation Panel
Login to SP mode, and then press an SP
mode item while holding down the EX3 key.
In the User Tools screen, press a User Tools
category while holding down the EX3 key.
Available for: System Settings,
Copier/Document Server Features, and
Scanner Features.
Hold down the EX3 key and [#]
simultaneously for 10 seconds.
Resets the controller software of the main
machine.
Hold down the EX3 key and [9]
simultaneously for 10 seconds.
3.System Maintenance
47