Ricoh M0A0 Service Manual page 538

3.Appendices: SP Mode Tables
bit DFU
3
bit DFU
4
bit Change the user ID type displayed on the operation panel
5
As of 15S models, the Login User Name can be displayed on the operation panel.
The user ID type displayed on the operation panel can be changed by configuring BitSwitch #12-5
as follows:

0 (default): Login User Name

1: User ID. If this is enabled, User ID will be displayed, which is equivalent to the behavior
exhibited in 14A and earlier models.
bit Ability to use AirPrint
6
For 15S and later models that support AirPrint, AirPrint can be disabled by changing this Bit Switch
from 0 (default) to 1.
bit DFU
7
1003 [Clear Setting]
001 Initialize Printer System
Initializes settings in the "System" menu of the user mode.
003 Delete Program
1004 [Print Summary]
Prints the service summary sheet (a summary of all the controller settings).
001 Print Printer Summary
002 Print Summary2
1005 [Display Version]
001 -
Displays the version of the controller firmware.
1007 [Supply Display]
Sets displaying remaining supply amount information or not.
0: Displays remaining supply amount information
170
CTL
-
-
0:Enabled
Enabled
-
*CTL
*CTL
CTL
CTL
[ - / - / - ]
-
-
1:Disabled
Disabled
-
[- / - / -]
[Execute]
[- / - / -]
[Execute]
[- / - / -]
[Execute]
[- / - / -]
[Execute]