Registration Roller (Driven) - Ricoh M0A0 Service Manual

4.Replacement and Adjustment

Use pliers to pinch the link in order to release it.
6. Remove the duplex entrance sensor [A]. (

Registration Roller (Driven)

1.
Remove the drive unit.
2.
Remove the gear unit.
3.
Remove the paper size switch
4.
Remove the registration sensor.
5. Remove the HVPS with bracket.
6.
Release the bearing [A] ×1 at the left end of the registration roller (drive) and fixing plate [B] ×1. ( x1,
7.
Release the bearing at the right end of the registration roller (drive), and remove the grounding plate [A]. (
142
x1, Hook)
(Drive Unit)
(Gear Unit)
(Paper Size Switch)
(Registration Sensor)
(HVPS with Bracket)
×2)
x 1,