Pjl Ustatus - Ricoh M0A0 Service Manual

4.Appendices: Software Configuration
Bit Switch #5-6=0:
Bit Switch #5-6=1:

Used in conjunction with Bit Switch #5-6, Orientation Auto Detect for PS/PDF jobs might cause unexpected
results.

PJL USTATUS

Printer Bit Switch description
Bit Switch 9-4
These control the way PJL USTATUS returns page count totals in cases where multiple copies of a job are being printed.
BitSw 9-4=0 (default):
This change the way an MFP/LP rotates PCL, PS, PDF, or RPCS print images.
1. The page count for a single copy is returned after the first copy is printed.
2. The page count for the rest of the copies, excluding the first copy, is returned after all copies have been printed.
3. This emulates an older HP PCL firmware spec. It is only needed for compatibility with legacy software.
BitSw 9-4=1:
The page count for all copies is output after all copies have been printed.
This emulates more recent HP PCL firmware specs.
For example, consider 3 copies of a 3 page job:
180