Service Program Tables; Sp1-Xxx (Bit Sw); Sp2-Xxx (Ram); Sp3-Xxx (Machine Set) - Ricoh M0A0 Service Manual

4.Service Tables

Service Program Tables

SP1-XXX (BIT SW)

1 Mode No.
101 System Switch
001 – 032
102 I fax Switch
001 – 016
103 Printer Switch
001 – 016
104 Communication Switch
001 – 032
105 G3-1 Switch
001 – 016
111 IP fax Switch
001 – 016

SP2-XXX (RAM)

2 Mode No.
101 001 RAM Read/Write
102 Memory Dump
001 G3-1 Memory Dump
103 G3-1 NCU Parameters
001 – 023 CC, 01 – 22

SP3-XXX (Machine Set)

3 Mode No.
101 Service Station
001 Fax Number
36
00 – 1F Change the bit switches for system settings for the fax option
"Bit Switches –
00 – 0F Change the bit switches for internet fax settings for the fax option
"Bit Switches –
00 – 0F Change the bit switches for printer settings for the fax option
"Bit Switches –
00 – 1F Change the bit switches for communication settings for the fax option
"Bit Switches –
00 – 0F Change the bit switches for the protocol settings of the standard G3 board
"Bit Switches –
00 – 0F Change the bit switches for optional IP fax parameters
"Bit Switches –
Change RAM data for the fax board directly.
Service RAM Addresses
Print out RAM data for the fax board.
Service RAM Addresses
NCU parameter settings for the standard G3 board.
Enter the fax number of the service station.
Function
1" : "System Switches"
2" : "I-Fax Switches"
2" : "Printer Switches"
3" : "Communication Switches"
4" : "G3 Switches"
6" : "IP Fax Switches"
Function
Function
NCU Parameters