Ricoh M0A0 Service Manual page 714

4.Service Tables
0 0
0 1
0 1
0 1
4-5 Modem setting for transmission
Bit 5 Bit 4
0 0
0 1
1 0
1 1
6-7 Not used
IP Fax Switch 06 (SP No. 1-111-007)
No. Function
0-3 Modem bit rate setting for reception
Sets the modem bit rate for reception. The default is "0110" (14.4K bps).
4-7 Modem setting for reception
Sets the modem type for reception. The default is "0100" (V27ter, V29, V17).
Bit 7
0
0
0
0
Other settings - Not used
IP Fax Switch 07 (SP No. 1-111-008)
No. Function
0 TSI information
0: Not added, 1: Added
1 DCN transmission setting at T1 timeout
0: Not transmitted
1: Transmitted
2 Not used
3 Hang up setting at DIS reception disabled
0: No hang up
1: Hang up after transmitting DCN
4 Number of times for training
0: 1 time, 1: 2 times
88
1 1 7.2
0 0 9.6
0 1 12.0
1 0 14.4
Types
V29
V17
Not used
Not used
Bit 6 Bit 5
0 0
0 1
0 1
1 0
Sets the modem type for transmission.
The default is "00" (V29).
Do not change these settings.
Comments
Bit 4 Types
1 V.27ter
0 V.27ter, V.29
1 V.27ter, V.29, V.33
0 V.27ter, V.29, V.17/V.33
Comments
Adds or does not add TSI information to NSS(S).
Transmits or does not transmit DCN at T1 timeout.
Do not change this setting.
Sets whether the machine disconnects after DIS reception.
Selects the number of times training is done at the same bit
rate.