Ricoh M0A0 Service Manual page 734

4.Service Tables
Bit 1: Automatic communication failure report and transfer result report output 0: Off, 1: On
Bit 4: Indicates the parties 0: Not indicated, 1: Indicated
Bit 5: Include sender's name on reports 0: Off, 1: On
Bit 7: Inclusion of a sample image on reports 0: Off, 1: On
6800D5(H) - User parameter switch 05 (SWUSR_05)
Bit 0: Substitute reception when the base copier is in an SC condition 0: Enabled, 1: Disabled
Bits 1 and 2: Condition for substitute rx when the machine cannot print messages (Paper end, toner end, jam, and
during night mode)
Bit 2: 0, Bit 1: 0 = The machine receives all the fax messages.
Bit 2: 0, Bit 1: 1 = The machine receives the fax messages with RTI or CSI.
Bit 2: 1, Bit 1: 0 = The machine receives the fax messages with the same ID code.
Bit 2: 1, Bit 1: 1 = The machine does not receive anything.
Bit 4: Not used
Bit 5: Just size printing 0: Off, 1: On
Bit 6: Not used
Bit 7: Add paper display when a cassette is empty 0: Off, 1: On
6800D6(H) - User parameter switch 06 (SWUSR_06): Not used
6800D7(H) - User parameter switch 07 (SWUSR_07)
Bit 0 Ringing 0: Off, 1: On
Bit 1: Automatic answering message 0: Off, 1: On
Bit 2: Parallel memory transmission 0: Off, 1: On
Bit 5: Remote control 0: Off, 1: On
6800D8(H) - User parameter switch 08 (SWUSR_08)
Bits 1: Not used.
Bit 2: Authorized reception
0: Only faxes from senders whose RTIs/CSIs are specified for this feature are accepted.
1: Only faxes from senders whose RTIs/CSIs are not specified for this feature are accepted.
6800DA(H) - User parameter switch 10 (SWUSR_0A)
Bits 0: Restrict control panel operations such as printing or deleting received documents 0: Off, 1: On
Bits 1: Combined two originals 0: Off, 1: On
Bit 3 to 5: Not used
Bit 6: Use both e-mail notification and printed reports to confirm the transmission results 0: Off, 1: On
Bit 7: Have the machine delete the document data without printing it when an error occurs 0: Off, 1: On
6800DB(H) - User parameter switch 11 (SWUSR_0B)
Bits 1 and 2: Not used
Bit 3: Receive rejection for 1300 Hz transmission 0: Off (receive), 1: On (not receive)
Bit 5: Print documents that are forwarded to other parties with Forwarding per Sender 0: Off, 1: On
Bit 6: Printout of messages received while acting as a forwarding station 0: Off, 1: On
Bit 7: Not used
108