Ricoh M0A0 Service Manual page 208

5.System Maintenance
When it appears, "Please Wait" is displayed.
7. Check whether a program installation screen is displayed. When two or more software modules are contained in
the SD card, they are displayed as follows.
When two or more software names are displayed
1.
Press the module selection button or 10 keypad [1] - [5].
2.
Choose the appropriate module. (If already selected, cancel the selection)
Operation of keys or buttons
Keys or buttons to press
[Exit] or 10 key [0]
[Start] Key
[Clear/Stop] key
Display contents
On the above screen, two programs are displayed, i.e., engine firmware and printer application. (The screen may
change depending on the firmware or application).
The display contents are as follows:
Display
ROM: Displays installed module number / version information.
NEW: Displays module number / version information in the card.
* The upper row corresponds to the module number, the lower row corresponds to the version name.
8. Select the module with the module selection button or 10 key operation. The selected module is highlighted, and
[Verify] and [Update] are displayed.

Depending on the combination of update software, it may not be possible to select simultaneously.
196
Returns to normal screen.
Select all modules.
Cancel all selection states.
Contents
Contents