Appendices: Sp Mode Tables; Service Program Mode; Service Table Key - Ricoh M0A0 Service Manual

3. Appendices: SP Mode Tables

Service Program Mode

Service Table Key

Notation
[range / Example: [-9 to +9 / 0 / 0.1 mm step]. The setting can be adjusted in the range ±9, value reset to
default / step] +3.0 after an NVRAM reset, and the value can be changed in 0.1 mm steps with each key press.
* Value stored in NVRAM. After a RAM reset, this default value (factory setting) is restored.
DFU Denotes "Design or Factory Use". Do not change this value.
Japan only The feature or item is for Japan only. Do not change this value.
SSP This denotes a "Special Service Program" mode.
FSP This denotes a "Factory Service Program" mode.
3.Appendices: SP Mode Tables
What it means
17