Ricoh M0A0 Service Manual page 239

4. Press [Execute Update].
5. Check the version of the received package firmware, and then Press [YES].

Update is started.

If the version of the reserved package in the HDD is older than the latest version, the messages shown in
the following picture are displayed.
 If you wish to download the latest version, Press [Execute] beside the message "Download and update
the latest package." Then update of the package firmware will be started.

If you wish to update using the firmware in the HDD (old version), Press [Execute] beside the message
"Update to the received package."
6. [Update done] message is displayed.
5.System Maintenance
227