Ricoh M0A0 Service Manual page 304

6.Troubleshooting
SC No. Level
SC No. Level
SC873-00 B
SC No. Level
SC874-05 D Delete all error (Delete data area) : Read error
SC874-06 D Delete all error (Delete data area) : Write error
SC874-10 D Delete all error (Delete data area) : Error in Kernel
SC874-12 D Delete all error (Delete data area) : No designated partition
SC874-13 D Delete all error (Delete data area) : No device file
SC874-14 D Delete all error (Delete data area) : Start option error
SC874-15 D Delete all error (Delete data area) : No designated sector number
SC874-16 D Delete all error (Delete data area) : failure in performing hdd erase
SC874-41 D Delete all error (Delete data area) : Other fatal errors
SC874-42 D Delete all error (Delete data area) : End by cancellation
SC874-61 D Delete all error (Delete data area) : library error
to -65
SC874-66 D Delete all error (Delete data area) : Unavailable
SC874-67 D Delete all error (Delete data area) : Erasing not finished
SC874-68 D Delete all error (Delete data area) : HDD format failure (Normal)
SC874-69 D Delete all error (Delete data area) : HDD format failure (Abnormal)
SC874-70 D Delete all error (Delete data area) : Unauthorized library
SC874-99 D Delete all error (Delete data area) : other errors
An error occurred while data was being erased on HDD or NVRAM




292
Error Name/Error Condition/Major Cause/Solution

Power failure while accessing the HDD

Use SP5832-007 to initialize the HDD (HDD-related: Format: Mail received data).

Replace the HDD.
Error Name/Error Condition/Major Cause/Solution
HDD mail transfer error
An error is detected in the HDD at machine power-on.

Defective HDD

Power failure while accessing the HDD
 Use SP5832-008 to initialize the HDD (HDD-related: Format: Mail transfer data).

Replace the HDD.
Error Name/Error Condition/Major Cause/Solution
Error detected in HDD data delete program
Error detected in NVRAM data delete program
The "Delete All" option was not set
Turn the main power switch off and back on, and then execute "Erase All Memory" under
UP mode again. (However, if there is a defective sector or other problem with the hard