Ricoh M0A0 Service Manual page 671

0: Manual TX and RX
operation
1: Memory TX and RX
operation (the display remains
the same)
4- Not used
7
System Switch 0F (SP No. 1-101-016)
No Function
0 Country/area code for
to functional settings (Hex)
7 00: France 12: Asia
01: 13: Japan
Germany
02: UK 14: Hong
Kong
03: Italy 15: South
Africa
04: Austria 16: Australia
05: Belgium 17: New
Zealand
06: 18: Singapore
Denmark
07: Finland 19: Malaysia
08: Ireland 1A: China
09: Norway 1B: Taiwan
0A: Sweden 1C: Korea
0B: Switz. 1D: Brazil
0C: Portugal 20: Turkey
0D: Holland 21: Greece
0E: Spain 22: Hungary
0F: Israel 23: Czech
10: --- 24: Poland
11: USA
System Switch 10 (SP No. 1-101-017)
No Function
Manual TX is not possible.
1: The display stays in standby mode even when the external handset is
used, so that other people can use the machine for memory TX operation.
Note that manual TX and RX are not possible with this setting.
Do not change these settings.
Comments
This country/area code determines the factory settings of bit switches and
RAM addresses. However, it has no effect on the NCU parameter settings
and communication parameter RAM addresses.
Cross reference
NCU country code:
SP No. 2-103-001 for G3-1
SP No. 2-104-001 for G3-2
SP No. 2-105-001 for G3-3
4.Service Tables
Comments
45