Ricoh M0A0 Service Manual page 690

4.Service Tables
2 Treatment of pages received with
errors during G3 reception
0: Deleted from memory without
printing
1: Printed
3 Hang-up decision when a negative
code (RTN or PIN) is received during
G3 immediate transmission
0: No hang-up, 1: Hang-up
4- Not used
7
Communication Switch 03 (SP No. 1-104-004)
No Function
0- Maximum number of page retransmissions in a G3 memory
7 transmission
Communication Switch 04 (SP No. 1-104-005)
No Function
0 Remote mode switch (TEL
mode)
0: Disable
1: Enable (Active)
1 Remote mode switch (FAX
mode)
0: Disable
1: Enable (Active)
2 Remote mode switch
(AUTO mode)
0: Disable
1: Enable (Active)
3- Not used
7
Communication Switch 05 (SP No. 1-104-006)
No Function
64
0: Pages received with errors are not printed.
0: The next page will be sent even if RTN or PIN is received.
1: The machine will send DCN and hang up if it receives RTN or PIN.
This bit is ignored for memory transmissions or if ECM is being used.
Do not change these settings.
Comments
Set this bit to ON when you wish to switch TEL mode to FAX mode remotely.
Set this bit to ON when you wish to turn on the remote mode switch after
automatic reception with FAX mode.
Set this bit to ON when you wish to turn on the remote mode switch after
automatic reception with AUTO mode.
Do not change the settings.
Comments
Comments
00 - FF (Hex) times.
This setting is not used if ECM is switched
on.
Default setting - 03(H)