Nvram Data Upload/Download; Uploading Content Of Nvram To An Sd Card - Ricoh M0A0 Service Manual

5.System Maintenance

NVRAM Data Upload/Download

Uploading Content of NVRAM to an SD card

Do the following procedure to upload SP code settings from NVRAM to an SD card.

This data should always be uploaded to an SD card before the NVRAM is replaced.

Make sure that the write protection of an SD card is unlocked
1.
Do SP5-990-001 (SMC Print) before turning OFF the main power. You will need a record of the NVRAM settings
if the upload fails.
2.
Turn OFF the main power.
3.
Remove the SD card slot cover [A].
4.
Insert the SD card into SD slot 2 [A].
206