Return To Stand-By Mode; Recommendation - Ricoh M0A0 Service Manual

7.Detailed Descriptions
machine, the machine exits Fusing Unit Off mode regardless of this setting.
If the timer is set to [On], you can set the time from 10 seconds to 240 minutes, using the number keys.
Fusing Heater Off on Standby
You can specify whether or not to turn off the fusing heater automatically when Sleep mode timer is set to 30 minutes or
longer or Fusing Unit Off mode is disabled and the printer remains in standby mode for 30 minutes or longer. The
printer consumes less energy when the fusing heater is turned off than when the printer is in standby mode.

Auto Turn Off

Do not Auto Turn Off
Default: [Auto Turn Off]

Return to Stand-by Mode

Sleep Mode
Recovery time: Less than 10 sec.

Recommendation

We recommend that the default settings should be kept.

If the customer requests that these settings should be changed, please explain that their energy costs could
increase, and that they should consider the effects on the environment of extra energy use.

If it is necessary to change the settings, please try to make sure that the Sleep Mode timer is not too long. Try with a
shorter setting first, such as 5 min., then go to a longer one (such as 15 min.) if the customer is not satisfied.

If the Sleep Mode timer is all set to the maximum value, the machine will not begin saving energy until 240 minutes
has expired after the last job. This means that after the customer has finished using the machine for the day, energy
will be consumed that could otherwise be saved.

If you change the settings, the energy consumed can be measured using SP8941, as explained below.
354