Move Exec - Ricoh M0A0 Service Manual

Move Exec

"Move Exec" (SP5-873-001) lets you move application programs from the original SD card to another SD card.

Do not turn ON the write protect switch of the system SD card or application SD card on the machine. If the
write protect switch is ON, a download error (e.g. Error Code 44) will occur during a firmware upgrade or
application merge.
1.
Turn the main power OFF.
2.
Remove the SD card slot cover [A].
3.
Make sure that a target SD card is in SD Card Slot 1 [A]. The application program is moved to this SD card.
4.
Insert the source SD card with the application program into SD Card Slot 2 [B].
The application program is copied from this source SD card.
5.
Turn the main power ON.
2.Installation
79