Printer Service Mode; Sp1-Xxx (Service Mode) - Ricoh M0A0 Service Manual

Printer Service Mode

SP1-XXX (Service Mode)

1001 [Bit Switch]
001 Bit Switch 1 Settings
bit DFU
0
bit Responding with the hostname as the sysName
1
This BitSwitch can change the value of the sysName.
0 (default): Model name (PnP name) such as "MP 402SPF"
1: Host name
bit DFU
2
bit No I/O Timeout
3
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting will have no affect. I/O
Timeouts will never occur.
bit SD Card Save Mode
4
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not output to paper.
bit [PS and PDF] Paper size error margin
5
When a PS job is printed by using a custom paper size, the job might not be printed because of a
paper size mismatch caused by a calculation error. By default, the error margin for matching to a
paper size is ±5 points. By enabling this BitSwitch, the error margin for matching to a paper size can
be extended to ±10 points.
bit DFU
6
bit [RPCS,PCL]: Printable area frame border
7
Prints all RPCS and PCL jobs with a border around the printable area.
1001 [Bit Switch]
002 Bit Switch 2 Settings
bit DFU
0
bit DFU
1
bit DFU
2
bit [PCL5e/c,PS]: PDL Auto Switching
3
Enables/Disables the MFPs ability to change the PDL processor mid-job.
3.Appendices: SP Mode Tables
0
-
Model name (PnP name)
-
Disabled
Disabled
±5pt
-
Disabled
0
-
-
-
Enabled
1
-
Hostname
-
Enabled
Enabled
±10pt
-
Enabled
1
-
-
-
Disabled
163