Notes - Siemens Synco RMZ792 Series Basic Documentation

Field of application
Intended use
Electrical installation
Commissioning
Operation
Wiring
Storage and transport
Maintenance
Faults
Disposal
Siemens
Building Technologies
1.7

Notes

This symbol draws your attention to special safety notes and warnings. Failing to
observe these notes may result in injury and/or serious damages.
You may use the devices listed in Section 1.4 only to control and monitor heating,
ventilating, air conditioning, and chilled water plants.
Trouble-free and safe device operation presupposes transport, storage, mounting,
installation, and commissioning as intended as well as careful operation.
Fuses, switches, wiring and earthing must comply with relevant national safety
regulations for electrical installations.
Only qualified persons trained by Siemens or its delegates may prepare for use and
commission the devices.
The devices may only be operated by staff instructed by Siemens or its delegates and
who understand the potential risks.
When wiring the system, strictly segregate the AC 230 V section from the AC 24 V
safety extra-low voltage (SELV) section to protect against electric shock hazard!
Refer to the environmental conditions specified in the respective data sheets for
storage and transport.
If in doubt, contact your supplier or Siemens.
The devices are maintenance-free and only require regular cleaning. We recommend
removing dust and dirt from system components installed in the control panels during
standard service.
Call service staff responsible for your plant in case of system faults; do not diagnose
and correct faults.
Only authorized staff may diagnose and correct faults and recommission the plant. This
applies as well to work carried out within the panel (e.g. safety checks or replacement
of fuses).
Devices contain electrical and electronic components; do not dispose of them in the
household garbage.
Comply with all local, applicable laws.
Bus operator unit RMZ792 Series B
1 Overview
11/58
CE1P3113en
07.07.2011