Motorola CPEi 725 User Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Network Hardware
  5. CPEi 725
  6. User manual

Motorola CPEi 725 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Powerful Features in a Single Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Front of the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Back of the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Operating Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Before you Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Procedure to Log into the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Setup Wizard and Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Personalize Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Password Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Device Time Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Device Name Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Restore Factory Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Internet Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
WiMAX Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Firewall Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Dynamic DNS Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Status Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Telephony Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Port Forwarding Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Forwarding Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Local Address Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
DHCP Server Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Lease Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Lease Reservation Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Software Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Certificate Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Table
of
Contents

Advertisement

Table of Contents
loading

Related Manuals for Motorola CPEi 725

Summary of Contents for Motorola CPEi 725

  • Page 1: Table Of Contents

    Contents Chapter 1: Desktop CPEi 725 User Guide Overview ..............1-1 Powerful Features in a Single Unit .
  • Page 2 Disposal of Motorola Equipment in EU Countries ....... . .

  • Page 3: Chapter 1: Desktop Cpei 725 User Guide

    Desktop CPEi 725 User Guide Chapter 1: Desktop CPEi 725 User Guide Overview Powerful Features in a Single Unit...

  • Page 4: Front Of The Cpe

    Desktop CPEi 725 User Guide Front of the CPE The front of the CPE unit contains LED Link/Activity indicators. The LEDs provide the status of the unit and signal strength indicators for easy adjustment during setup. Table 1-1 LED Indicator Interface...

  • Page 5: Operating Information

    Desktop CPEi 725 User Guide Table 1-2 Port Descriptions Port Port Description Operating Information ° °...
  • Page 6 Desktop CPEi 725 User Guide...

  • Page 7: Chapter 2: Installation

    Installation Chapter 2: Installation Overview To install the Desktop CPEi Series, review the following sections: • Before You Begin • Easy Setup Before you Begin Before you begin installation, check that you have received the following items with your Desktop CPEi Table 2-1 In the box with your CPE, you should have Item Description...

  • Page 8: Advanced Setup

    Enter the IP address: http://192.168.15.1 into Address field in order to gain access to your CPE. If you cannot access the CPE, refer to the chapter titled: Configuring TCP/IP for more information. 3. The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a password.

  • Page 9: Setup Wizard And Authentication

    • Re-type your new password in the Confirm New Login Password box. • Click Next. If you forget your password, you can reset it back to the default (motorola) password. To reset the password, press and hold the reset button on the back of your CPE for 5 or more seconds.
  • Page 10 Installation • Check the box that is called “Auto Adjust for Daylight Savings Time” if you live in a region that observes Daylight Savings Time. This box is checked by default. • Click the Next button. Step 3 - WiMAX Security The WiMAX Security tab contains your authentication method.
  • Page 11 Installation Figure 2-2: Status Screen Restart Button Figure 2-3: Restart Button...
  • Page 12 Installation 68P09292A81-B JUN 2008...

  • Page 13: Chapter 3: Basic Configuration

    Basic Configuration Chapter 3: Basic Configuration Once the CPE setup has been completed, you can log in to your CPE from any computer on your home network. To log in type the device name in the address bar on your computer. The default device name is mywimax. This section describes the PERSONALIZE, INTERNET, and STATUS Menus that are available.

  • Page 14: Password Tab

    Basic Configuration Password Tab The password tab allows you to enable/disable password protection. You can also change your password here. Be sure to click the Apply button when finished Table 3-1 Password Tab Field or Button Description Enable Login Password Protection Checking this box requires login password protection.

  • Page 15: Restore Factory Settings Tab

    Basic Configuration Restore Factory Settings Tab The Restore Factory Settings Tab resets your CPE to the manufacturers default settings. Be sure to click the Apply button if you are sure that you want to reset factory settings. Table 3-4 Restore Factory Settings Tab Field or Button Description Restore Factory Settings...

  • Page 16: Wimax Security Tab

    Basic Configuration WiMAX Security Tab The WiMAX Security tab contains your authentication method. Check with your service provider to determine a user name and password are required for authentication purposes. Table 3-5 WiMAX Security Tab Field or Button Description Authentication Method Drop down box allows you to select either EAP-TLS (default) or EAP-TTLS/MS- CHAPv2.

  • Page 17: Dynamic Dns Tab

    Basic Configuration Table 3-6 Firewall Tab Field or Button Description Enable ping from Internet Enables the CPE to respond to a ping from the Internet. This option would be enabled to allow testing only. Do not leave this enabled. Be sure to click the Apply button once you are finished. Dynamic DNS Tab Dynamic Domain Name Service (DDNS) allows a user with a non-static IP address to keep their domain name associated with an ever changing IP address.

  • Page 18: Telephony Menu

    Basic Configuration Figure 3-3: Status Menu Network Tab The Network tab provides any status associated with your WiMAX Wireless Broadband connection. Telephony Tab The Telephony tab provides any status associated with your telephony connection. Telephony Menu The telephony menu allows you to manage your Voice over Internet Protocol (VoIP) services.
  • Page 19 Basic Configuration Figure 3-4: Telephony Menu Account Tab Please consult with your service provider for these settings. The Account Tab contains the following settings: Table 3-8 Account Tab Field or Button Description Line 1 User Name If Line 1 is an active VoIP, enter the User Name as provided by your service provider.
  • Page 20 Basic Configuration Ring Tone Tab The Ring Tone tab allows you to customize ring tones for your telephone(s). NOTE You need a phone connected to your CPE to hear ring tones. Table 3-9 Ring Tone Tab Field or Button Description Default Line 1 Ring Type Use the drop-down box to select a ring tone for Line 1.
  • Page 21 Basic Configuration Table 3-10 Caller ID Tab Field or Button Description Enable Line 2 Permanent Anonymous If Line 2 is your active telephone port, Outgoing Call check this box if you would like to permanently block your telephone number from appearing on others’ Caller ID. The default is unchecked.
  • Page 22 Basic Configuration Table 3-11 Call Forwarding Tab Field or Button Description Enable Line 2 Forwarding on No Answer Check this box to forward calls received on Line 2 if there is no answer. This function is not available if “Enable Line 2 Basic Forwarding”...
  • Page 23 Basic Configuration Special Number Tab The Special Number tab provides a list of special dialing numbers for your VoIP Phone Service. The Special Number Tab contains the following: Table 3-13 Special Number Tab Field or Button Description Service Provider Contact Number Use this number to contact customer service for your service provider.
  • Page 24 Basic Configuration Table 3-13 Special Number Tab Field or Button Description Automatic Callback Activate Dial this number to hear the most recent call you missed and to return the call. If the number is busy, you can hang up. When the number is available, your phone will ring.

  • Page 25: Chapter 4: Advanced Configuration

    Advanced Configuration Chapter 4: Advanced Configuration The Advanced Configuration section describes the Port Forwarding, Local Address, and Control Panel menus. Port Forwarding Menu Port forwarding enables you to direct incoming traffic to specific LAN hosts (computers on your network) based on the protocol and port number. It is used to play Internet games or provide local services (such as web hosting) for a LAN group.

  • Page 26: Forwarding Tab

    Advanced Configuration Forwarding Tab Click the ADD button to create additional Port Forwarding rules. The Forwarding tab contains the following selections: Table 4-2 Forwarding Tab Field or Button Description Select Select a box when you want to delete the specific row. Protocol Select TCP (Transmission Control Protocol) or UDP (User Datagram...

  • Page 27: Dhcp Server Tab

    Advanced Configuration Figure 4-2: Local Address Menu DHCP Server Tab The DHCP Server tab enables Dynamic Host Configuration Protocol (DHCP) server functionality on the LAN, allowing the router to dynamically assign lease IP addresses to clients that connect to it from the local network. The DHCP Server Tab contains the following selections: Table 4-3 DHCP Server Tab Field or Button...

  • Page 28: Lease Status Tab

    Advanced Configuration Table 4-3 DHCP Server Tab Field or Button Description DHCP Ending IP Address Sets the final IP address assigned by the DHCP server. If the DHCP server runs out of DHCP addresses, users cannot access network resources. If this happens, increase the Ending IP or reduce the Lease Time.

  • Page 29: Control Panel

    Advanced Configuration Table 4-5 Lease Reservation Tab Field or Button Description Select Select this box if you want to delete an established lease reservation. Be sure to click the Delete button once you have selected the exception to be deleted. Client Host Name Enter the client host name.

  • Page 30: Software Tab

    Advanced Configuration Figure 4-3: Control Panel Menu Software Tab The Software tab manages the software on your CPE device. It is also where you can upgrade device software. Use the BROWSE button to browse your computer for additional software packages. Once you have located the software package/update you would like to add to your device, click the Upgrade button.

  • Page 31: About Tab

    Advanced Configuration Table 4-6 System Tab Field or Button Description Language Used in User Interface Select the desired language for the user interface. The default language is English. Enable WiMAX Radio Interface Check this box to enable the WiMAX Radio Interface. Enable LED Check this box to enable the LEDs on the front of your CPE device.
  • Page 32 Advanced Configuration...

  • Page 33: Chapter 5: Configuring Tcp/Ip

    Configuring TCP/IP Chapter 5: Configuring TCP/IP This section contains two examples of configuring TCP/IP in a Windows environment. Most computers already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is set up. Configure all client computers on your network for TCP/IP (the protocol that controls communication among computers).
  • Page 34 Configuring TCP/IP Figure 5-2: Network and Dial-up Connections In the steps that follow, a connection number like 1, 2, 3, etc., is a reference that is displayed on computers with multiple network interfaces. Computers with only one network interface may only see the label: Local Area Connection. 4.
  • Page 35 Configuring TCP/IP Figure 5-4: Properties 6. If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to Step 10. Figure 5-5: Select Network Connection Type If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is displayed: 7.
  • Page 36 Configuring TCP/IP Figure 5-6: Select Network Protocol NOTE You might have to use the scroll bar to locate the Internet Protocol (TCP/ IP) setting 8. Click Internet Protocol (TCP/IP). 9. Click OK. The Local Area Connection number Properties window is re-displayed. 10.

  • Page 37: Configuring Tcp/Ip In Windows Xp

    Configuring TCP/IP 13. Click OK to accept the TCP/IP settings. 14. Click Close to close the Local Area Connection number Properties window. 15. Click OK. 16. If prompted to restart the computer and click OK again. Configuring TCP/IP in Windows XP 1.
  • Page 38 Configuring TCP/IP Figure 5-10: Network and Internet Connections 4. Click Network Connections. Skip to Step 6. 5. If a classic view like Figure 5-11 is displayed, double-click Network Connections to display the LAN or High-speed Internet connections. Figure 5-11: Control Panel Classic View 6.
  • Page 39 Configuring TCP/IP Figure 5-12: Network Connections 7. Select Properties from the pop-up menu to display the Local Area Connection Properties window: Figure 5-13: Local Area Connection Properties 8. On the Local Area Connection Properties window, select Internet Protocol (TCP/ IP) if it is not selected. 9.
  • Page 40 Configuring TCP/IP Figure 5-14: Internet Protocol (TCP/IP) Properties 10. Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected. 11. Click OK to close the TCP/IP Properties window.

  • Page 41: Chapter 6: Troubleshooting

    Troubleshooting Chapter 6: Troubleshooting Power • Check that the AC power adapter is properly plugged into the electrical outlet and into the Desktop CPE. • Check that the electrical outlet is working. A Computer Cannot Log On to the CPE Check that the Ethernet cable is properly connected to the Desktop CPE unit and the computer.
  • Page 42 Troubleshooting...

  • Page 43: Chapter 7: Important Safety And Legal Information

    Important Safety and Legal Information Chapter 7: Important Safety and Legal Information Your Motorola WiMAX Wireless Broadband Gateway is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy.

  • Page 44: Industry Canada Statement

    Important Safety and Legal Information • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Gateway desktop transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

  • Page 45: Caring For The Environment

    Important Safety and Legal Information Caring for the Environment The following information is provided to enable regulatory compliance with the European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE) when using Motorola Networks equipment in EU countries.

  • Page 46: Disposal Of Motorola Equipment In Eu Countries

    Hazardous Substances (EU RoHS) directive. Please do not dispose of Motorola Networks equipment in landfill sites. In the EU, Motorola Networks in conjunction with a recycling partner will ensure that equipment is collected and recycled according to the requirements of EU environmental law.

  • Page 47: Copyrights And Trademarks

    Motorola, Inc. does not assume any liability arising out of the application or use of any product, software, or circuit described herein;...
  • Page 48 Risk Activities). Motorola and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. Trademarks MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. 2009...

Table of Contents