Mds For Multi-Channel Display - Siemens SINUMERIK 840C Installation Instructions Manual

09.95
6.8
MDs for screen
20440-
20419
Reserved for customer UMS.
20420-
20439
Reserved for system UMS.
20440
If MD 20440 is defined as 2, the basic display for channel 2 appears on the left or, in the large
actual-value display, in the upper part of the display.
20441
If MD 20441 is defined as 2, the basic display for channel 2 appears on the right or, in the
large actual-value display, in the lower part of the display.
20442-
20449
Reserved for the system.
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on

MDs for multi-channel display

Default value Lower input limit
0
Default value Lower input limit
0
Multiple-channel display left or top
Default value Lower input limit
1
Multi-channel display right or below
Default value Lower input limit
2
Multi-channel display reserved for the system
Default value Lower input limit
0
ManualsBase.com
6 NC Machine Data (NC MD), NC Setting Data (NC SD)
Multiple-channel display
Upper input limit
0 4 (as from SW 4: 6)
Multiple-channel display
Upper input limit
0 4 (as from SW 4: 6)
Upper input limit
0 4 (as from SW 4: 6)
Upper input limit
0 4 (as from SW 4: 6)
Upper input limit
0 4 (as from SW 4: 6)
6FC5197- AA50
6.8 MDs for multi-channel display
Active on
Warm restart
–
Active on
Warm restart
–
Active on
Warm restart
–
Active on
Warm restart
–
Active on
Power On
Units
–
6–195