Siemens SINUMERIK 840C Installation Instructions Manual page 445

7 Drive Machine Data (SIMODRIVE Drive MD)
7.1.2 MSD MD (data description - SW 3)
216
Default value
0
Input of shift factor for signal 2 (see also MD 206). The top 8 bits from a 16-bit wide memory
location are output. This machine data specifies how often the value must be shifted to the left
beforehand.
217
Default value
0000
Input of low amplitude for the trigger signal value (see also MD 206).
A 1 ms long trigger signal can be output on commencement of the analog output.
218
Default value
7FFF
Input of high amplitude for the trigger signal value (see also MD 206).
A 1 ms long trigger signal can be output on commencement of the analog output.
219
Default value
Depends on motor
Input of motor moment of inertia as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 238).
220
Default value
Depends on motor
Input of motor rated current as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 238).
221
Default value
Depends on motor
Input of motor rated power as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 238).
7–30
More user manuals on
Shift factor signal 2
Lower input limit
0
Trigger signal value 1
Lower input limit
0000
Trigger signal value 2
Lower input limit
0000
Motor moment of inertia motor 2
Lower input limit
0.002
Motor rated power motor 2
Lower input limit
0
Motor rated current motor 2
Lower input limit
0
ManualsBase.com
Upper input limit
15
Upper input limit
FFFF
Upper input limit
FFFF
Upper input limit
32.000
Upper input limit
150.0
Upper input limit
200.0
©
Siemens AG 1992 All Rights Reserved
12.93
Active
at once
Units
–
Active
at once
Units
Hex
Active
at once
Units
Hex
Active on
Power On
Units
2
kgm
Active on
Power On
Units
kW
Active on
Power On
Units
A
6FC5197- AA50
SINUMERIK 840C (IA)