Siemens SINUMERIK 840C Installation Instructions Manual page 567

7 Drive Machine Data (SIMODRIVE Drive MD)
7.3.2 Drive MD (data description)
1655
Default value
0
This machine data addresses the memory location segment for the monitoring function.
Value table:
0
1
MD 1655 defines the DSP address in conjunction with MD 1656 (offset address). The contents
of the DSP address can be displayed via machine data "Value display monitor" (MD 1657).
Caution:
This machine data is relevant only for Siemens-internal purposes and must not be altered.
1656
Default value
0000
This machine data addresses the memory location offset address for the monitoring function.
MD 1656 defines the DSP address in conjunction with MD 1655 (memory location segment).
The contents of the DSP address can be displayed via machine data "Value display monitor"
(MD 1657).
Caution:
This machine data is relevant only for Siemens-internal purposes and must not be altered.
7–152
More user manuals on
Segment memory location monitor
Lower input limit
0
DSP address space X
DSP address space Y
Address memory location monitor
Lower input limit
0000
ManualsBase.com
Upper input limit
1
Upper input limit
FFFF
©
Siemens AG 1992 All Rights Reserved
04.96
Active
at once
Units
–
Active
at once
Units
Hex
6FC5197- AA50
SINUMERIK 840C (IA)