User Displays (As From Sw 3) - Siemens SINUMERIK 840C Installation Instructions Manual

5 Machine Data Dialog (MDD – as from SW 3)

5.7 User displays (as from SW 3)

5.7
Selection
Explanation
5–30
More user manuals on
User displays (as from SW 3)
Machine
data
Press the Diagnosis, Start-up, Machine data and User MD softkeys to call up the
User displays screen.
Fig. 5.10
The user can configure his own lists of machine data in the NC data, NC axis, NC
spindle, PLC data, Drive FDD and Drive MSD areas which are accessed by
operating the User displays softkey.
This means that the user can look at all the machine data of the individual areas
that are important to him at a single glance. The lists can be configured under the
Edit list softkey.
ManualsBase.com

Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
09.95
Diagnosis
Start-up
User
displays
SINUMERIK 840C (IA)