Siemens SINUMERIK 840C Installation Instructions Manual page 508

04.96
1129
cos is required for the calculation of the equivalent circuit diagrams from the data on the
rating plate.
Note:
This machine data only applies to main spindle drives.
1130
Input of motor rated power as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 96).
Note:
This data is relevant only for MSD drives.
1132
Input of motor rated voltage as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 1102).
1134
Input of motor rated frequency as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 1102).
Note:
This data is relevant only for MSD drives.
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
Default value Lower input limit
0.8
Default value Lower input limit
0.0
Default value Lower input limit
380.0
Default value Lower input limit
50.0
ManualsBase.com
7 Drive Machine Data (SIMODRIVE Drive MD)
cos power factor
Upper input limit
0.0 1.0
Motor rated power
Upper input limit
0.0 1 500.0
Motor rated voltage
Upper input limit
0.0 5 000.0
Motor rated frequency
Upper input limit
0.0 3 000.0
6FC5197- AA50
7.3.2 Drive MD (data description)
Active on
Power On
Units
Active on
Power On
Units
kW
Active on
Power On
Units
V
Active on
Power On
Units
Hz
7–93