Siemens SINUMERIK 840C Installation Instructions Manual page 436

10.94
171
Depends on motor
Input of magnetizing reactance as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 96).
172
Depends on motor
Input of upper speed limit for the X
the motor data sheet (non-Siemens motor) or automatic parameterization using machine data
"Motor code number" (MD 96).
In the field-weakening range, the magnetizing reactance X
saturated value at the speed at which field weakening begins to the unsaturated value at the
upper limit speed of the X
173
Depends on motor
Input of speed at which field weakening starts as specified on the motor data sheet (non-
Siemens motor) or automatic parameterization using machine data "Motor code number"
(MD 96).
In the field-weakening range, the magnetizing reactance X
saturated value at the speed at which field weakening begins to the unsaturated value at the
upper limit speed of the X
174
Depends on motor
Input of motor maximum speed as specified on the motor data sheet (non-Siemens motor) or
automatic parameterization using machine data "Motor code number" (MD 96).
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
Magnetizing reactance motor 1
Default value Lower input limit
Upper speed X
Default value Lower input limit
characteristic (see diagram MD 175).
h
Speed at start of field weakening motor 1
Default value Lower input limit
characteristic (see diagram MD 175).
h
Motor maximum speed motor 1
Default value Lower input limit
ManualsBase.com
7 Drive Machine Data (SIMODRIVE Drive MD)
Upper input limit
0 65 535
characteristic motor 1
h
Upper input limit
100 24 000
characteristic (magnetizing reactance X
h
increases linearly from the
n
Upper input limit
100 6 000
increases linearly from the
n
Upper input limit
0 20 000
6FC5197- AA50
7.1.2 MSD MD (data description - SW 3)
Active on
Power On
Units
m
Active on
Power On
Units
rev/min
) as specified on
n
Active on
Power On
Units
rev/min
Active on
Power On
Units
min
7–21