09.95
5.8.4
5.8.4.1 1st level: File functions
Explanation
Edit
New
Edit
Delete
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
More user manuals on
File functions (sequence of operation – as from SW 3)
Machine
data
Press the Diagnosis, Start-up, Machine data and File functions softkeys to call
the 1st level file functions display.
Fig. 5.13
A new file can be created. You are prompted to enter a name.
Select a file that already exists from the manufacturer (Siemens) or user field.
Only the BOOT file cannot be selected. It is a special file required for the drive
installation. The selected file is displayed in the data record field in the
configuration display.
Files already existing can be deleted together with their contents in the display
field. First select the file to be deleted. Caution, if you select the BOOT file in the
Siemens branch (above) you will delete its contents!
ManualsBase.com
5 Machine Data Dialog (MDD – as from SW 3)
5.8.4 File functions (sequence of operation – as from SW 3)
Diagnosis
Start-up
File
functions
5–37