Pcf Files (Up To Sw 2) - Siemens SINUMERIK 840C Installation Instructions Manual

4 MMC Area Diagnosis

4.8.3 PCF files (up to SW 2)

4.8.3
Example of PCF files
4–60
More user manuals on
PCF files (up to SW 2)
From SW 3 the files MELDDATR and MELDTEXT are re-
sponsible for the entire alarm concept. Configuration is de-
scribed in the Interface Description Part 1, Signals.
PCF files are files in which the user can store alarm texts and messages. The
files are assigned to the language defined in the configuration file KONFIG.
On POWER ON, PCF files are automatically loaded from the current language
directory (set language) to the NCK if the file name is between PCF1 and
PCF9999.
In the directory DEUTSCH you will find the file PCF1
MACHINE
Start-up/SIEMENS/PLC data
PLC/data
Name
. .
DEUTSCH
ENGLISCH
ESPANOL
FRANCAIS
ITALIANO
TEA2
Start-up/SIEMENS/PLC data
PLC/data/DEUTSCH
Name
..
PCF1
LADER
PCF11
TUER1
SAVE
Fig. 4.26 PCF files in the directory DEUTSCH in the range DIAGNOSIS
If no PCF files yet exist in the language directory, they must first be created. You
can open and edit files in the following ways:
S
Create and edit a PCF file in the SERVICES area
S
Create and edit a PCF file in the PROGRAMMING area
S
Read in a file via V24 in the SERVICES area
With software version 2 and higher, message texts can also be configured using
the files MEDEATTR. and MELDETEXT in the DIAGNOSIS PC DATA/MASTER
CONTROL area.
A detailed description is to be found in Section 12 of the Interface Description
Part 1, Signals.
ManualsBase.com
PARAMETER PROGRAMM.
Length
12258 03–09–1993
Length
18 03–12–1993
0 03–12–1993
0 03–12–1993
0 03–12–1993
EDIT LOAD

Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SERVICES DIAGNOSIS
11:33
Date
15:46:08
Date
11:14:00
11:10:34
11:02:14
11:05:08
SINUMERIK 840C (IA)
09.95