Data Backup Procedure Via Streamer - Siemens SINUMERIK 840C Installation Instructions Manual

01.99

11.1.4 Data backup procedure via streamer

1)
Remark:
Using the menu option "Backup system" all data can be saved including additional options
such as WOP.
With "Backup user data" only user data are saved.
Note:
"User data" must be available when upgrading software.
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
Connect the streamer, insert tape
without write protection
"Setup/configure" options
"Setup streamer type"
Select type of streamer and tape
Select "Restore/Backup"
Backup system
continue
Reading out is executed automatically. According to the amount
of data this can take considerably more than 30 minutes
After completion of the readout, label tape
and insert write protection.
As opposed to "Backup system" (No. 2), with "Backup user data" (No. 4)
only the user data can be saved.
ManualsBase.com
11.1.4 Data backup procedure via streamer
Select "Backup"
1)
(No. 2)
(No. 2)
6FC5197- AA50
11 Data Backup/CPU Replacement
11–7