Display/Edit The Multi-Channel Functionality In The "Machine" Operating Area; Running-In A Program - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Multi-channel machining (only 840D sl)

9.2 Multi-channel support (only 840D sl)

The 2-window view cannot be activated if you have simultaneously selected the main spindle

and the counterspindle.

Display/edit the multi-channel functionality in the "Machine" operating area

You have various options to run-in programs.

Running-in channel-by-channel

Select the channels that you wish to process using the "Running-in" function in the "Program

control" window. The channels not selected here are brought into the "Program test (PRT)"

state. As a consequence, the channels are only calculated, but are not processed.

No M and auxiliary functions or tool functions are output. Spindle commands are only output

for selected spindles.

Running-in spindle-by-spindle

Only machining operations are executed for a spindle selected under program control /

running-in. When programming, using the block formation, allocate the corresponding

machining operations to a spindle.

When generating a block, a complete block can be assigned to a spindle. For the case that

the block is not executed, as the specified spindle cannot be processed, then save a so-

called "running-in – supplementary code"

Press the "3D view" softkey if you wish to view the workpiece as

a three-dimensional model.

Press the 2-window softkey if you wish to simultaneously view the

side view (left-hand window) and front view (right-hand window)

of the workpiece.

Software options

You require the "programSYNC" option for cross-channel program control.

Operating Manual, 03/2013, 6FC5398-8CP40-3BA1

Sinumerik 828d turning