Omron SYSMAC C200HS Operation Manual page 443

Standard Models
Name
All Plastic Optical Fiber Cable Set 1-m cable with an Optical Connector A connected to each
Optical Fiber Processing Kit
H-PCF
Name
Optical Fiber Cable
SYSMAC BUS SYSMAC WAY SYSMAC BUS, SYSMAC WAY
Optical Fiber Cable Connector
Note 1. Optical fiber cables must be prepared and connected by specialists.
2. If the user prepares and connects optical fiber cables, the user must take a seminar held under the aus-
pices of Sumitomo Electric Industries, Ltd. and obtain a proper certificate.
3. The Optical Power Tester, Head Unit, Master Fiber Set, and Optical Fiber Assembling Tool are required
to connect optical fiber cables.
Optical Fiber Assembling Tool
Name
Optical Fiber Assembling Tool
Note 1. Optical fiber cables must be prepared and connected by specialists.
2. The Optical Power Tester, Head Unit, Master Fiber set, and Optical Fiber Assembling Tool are required
to connect optical fiber cables.
Specifications
end
Accessory: 125-mm nipper (Muromoto Tekko's 550M) for
APF
Specifications
10 m, black
50 m, black
100 m, black
500 m, black
1000 m, black
10 m, orange
50 m, orange
100 m, orange
500 m, orange
1000 m, orange
10 m, black
50 m, black
100 m, black
500 m, black
1000 m, black
SYSMAC BUS:
C200H-RM001-PV1
C200H-RT001/RT002-P
C500-RM001-(P)V1
C500-RT001/RT002-(P)V1
B500-jjj(-P)
Specifications
Used to connect H-PCF and crimp-cut connectors for opti-
cal transmission systems such as the SYSMAC C- and
CV-series SYSMAC BUS, SYSMAC LINK and SYSMAC
NET.
Model number
3G5A2-PF101
3G2A9-TL101
Model number
Two-core cable S3200-HCCB101
S3200-HCCB501
S3200-HCCB102
S3200-HCCB502
S3200-HCCB103
S3200-HCCO101
S3200-HCCO501
S3200-HCCO102
S3200-HCCO502
S3200-HCCO103
Two-core cable S3200-HBCB101
S3200-HBCB501
S3200-HBCB102
S3200-HBCB502
S3200-HBCB103
Half-lock connector S3200-COCH82
for Remote I/O Mas-
ter, Remote I/O
Slave, Host Link
Unit, and Link
Adapter
Model number
S3200-CAK1062
Appendix A
439