Omron SYSMAC C200HS Operation Manual page 414

Host Link Commands
11-3-5 TC STATUS READ –– RG
Command Format
1
x 10 x 10
@
Node no.
Response Format
Parameters
11-3-6 DM AREA READ –– RD
Command Format
1
x 10 x 10
@
Node no.
Response Format
1
x 10 x 10
@
Node no.
Parameters
cimal as a response. The PVs are returned in order, starting with the specified
beginning timer/counter.
Reads the status of the Completion Flags of the specified number of timers/
counters, starting from the specified timer/counter.
0 3 2
x 10 x 10 x 10
R G
Header Beginning timer/counter
code (0000 to 0511)
1
x 10 x 10
@
Node no.
Read Data (Response)
The status of the number of Completion Flags specified by the command is re-
turned as a response. "1" indicates that the Completion Flag is ON.
Reads the contents of the specified number of DM words, starting from the spe-
cified word.
0 3 2
x 10 x 10 x 10
R D
Header Beginning word
code (0000 to 9999)
Note 1. If 10,000 words have to be read, specify the number of words to be read as
0000.
2. DM 6656 to DM 6999 do not exist. An error will not, however, result if you try
to read these words. Instead, "0000" will be returned as a response.
0 1 0
x 16 x 16 x 16
R D
Header End code
code
Read data (for number of words read)
Read Data (Response)
The contents of the number of words specified by the command are returned in
hexadecimal as a response. The words are returned in order, starting with the
specified beginning word.
1 0 3 2 1
x 10 x 10 x 10 x 10
No. of timers/counters
(0001 to 0512)
ON/
0 1 0
x 16 x 16
R G
OFF
Header End code
code
Read data
(1 timer/counter)
Read data
(for number of TC read)
1 0 3 2 1
x 10 x 10 x 10 x 10 x 10
No. of words
(0001 to 10000)
(see note)
3 2 1 0
x 16 x 16 x 16
Read data (1 word)
Section 11-3
0
: ↵
x 10
FCS Terminator
FCS
0
: ↵
FCS Terminator
: ↵
FCS Terminator
: ↵
Terminator
409