Omron SYSMAC C200HS Operation Manual page 152

Programmable controllers

Hide thumbs Also See for SYSMAC C200HS:

Table of Contents

Timer and Counter Instructions

One-Shot Bits

01000 TIM 001

The length of time that a bit is kept ON or OFF can be controlled by combining

TIM with OUT or OUT NO. The following diagram demonstrates how this is pos-

sible. In this example, 00204 would remain ON for 1.5 seconds after 00000 goes

ON regardless of the time 00000 stays ON. This is achieved by using 01000 as a

self-maintaining bit activated by 00000 and turning ON 00204 through it. When

TIM 001 comes ON (i.e., when the SV of TIM 001 has expired), 00204 will be

turned OFF through TIM 001 (i.e., TIM 001 will turn ON which, as an inverse con-

dition, creates an OFF execution condition for OUT 00204).

The following one-shot timer may be used to save memory.

Address Instruction

Address Instruction

Section 5-14

Show Quick Links

Chapters

Table of Contents