Omron SYSMAC C200HS Operation Manual page 374

Monitoring Operation and Modifying Data
7-1-15 UM Area Allocation
Key Sequence
Clear memory when
changing allocation
Example
366
This operation is used to allocate part of the UM Area for use as expansion DM. It
can be performed in PROGRAM mode only. Memory allocated to expansion DM
is deducted from the ladder program area.
The amount of memory available for the ladder program depends on the amount
of RAM in the CPU. About 15.2 KW of memory is available with the16-KW RAM
and about 31.2 KW is available with the 32-KW RAM.
This operation cannot be used to allocate UM to the I/O comment area. UM can
be allocated to the I/O comment area only with a host computer equipped with
LSS (V6 or higher).
[New data]
FUN VER CHG
00000
DM CM LAD
VER
00 00 15.2
UMAREA CHG?
INI DM SIZ:00KW
UMAREA CHG?
INI DM SIZ:02KW
UMAREA SET:
UMAREA SET:
DM CM LAD
02 00 13.2
00000
PLAY
9 7
SET
Clear memory completely if the UM Area
allocation will be changed.
The current UM Area allocation will be displayed.
"??" will be displayed if the allocation information
has been lost.
Press CHG to change the UM Area allocation.
Expansion DM can be set to 00, 01, 02, or 03 KW.
CHG
????
Enter the password by pressing PLAY/SET and
9713.
CHG
9713
The new UM Area allocation will be displayed. UM
allocated to expansion DM is deducted from the
ladder program.
Press CLR to return to the initial display.
Section 7-1
B D
1 3
CLR
WRITE