Omron SYSMAC C200HS Operation Manual page 428

Host Link Commands
Parameters
Name
OP1 OP2 OP3 OP4
C I O (S)
L R (S) (S)
H R (S) (S)
A R (S) (S)
T I M (S)
T I M H
C N T (S)
C N T R
T T I M
11-3-25 FORCED RESET –– KR
Command Format
1 0
@ x 10 x 10 K
Node no. Header
code
Response Format
Parameters
Name
OP1 OP2 OP3 OP4
C I O (S)
L R (S) (S)
H R (S) (S)
A R (S) (S)
T I M (S)
T I M H
C N T (S)
C N T R
T T I M
Name, Word address, Bit (Command)
In "Name", specify the area (i.e., IR, SR, LR, HR, AR, or TC) that is to be forced
set. Specify the name in four characters. In "Word address", specify the address
of the word, and in "Bit" the number of the bit that is to be forced set.
Classification
IR or SR
LR
HR
AR
Completion Flag (timer)
Completion Flag (high-speed timer)
Completion Flag (counter)
Completion Flag (reversible counter)
Completion Flag (totalizing timer)
(S): Space
Note 1. The area specified under "Name" must be in four characters. Fill any gaps
with spaces to make a total of four characters.
2. Words 253 to 255 cannot be set when the CIO Area is specified.
Force resets a bit in an IR, SR, LR, HR, AR, or TC area. Once a bit has been
forced set or reset, that status will be retained until FORCED SET/RESET CAN-
CEL (KC) is transmitted.
R OP1 OP2 OP3 OP4
Name
@ x 10
Name, Word address, Bit (Command)
In "Name", specify the area (i.e., IR, SR, LR, HR, AR, or TC) that is to be forced
reset. Specify the name in four characters. In "Word address", specify the ad-
dress of the word, and in "Bit" the number of the bit that is to be forced reset.
Classification
IR or SR
LR
HR
AR
Completion Flag (timer)
Completion Flag (high-speed timer)
Completion Flag (counter)
Completion Flag (reversible counter)
Completion Flag (totalizing timer)
(S): Space
Word address setting
0000 to 0511
0000 to 0063
0000 to 0099
0000 to 0027
0000 to 0511
3 2 1 0
x 10 x 10 x 10 x 10 x 10
Word
address
1 0 1
x 16
x 10 K R
Node no. Header End code
code
Word address setting
0000 to 0511
0000 to 0063
0000 to 0099
0000 to 0027
0000 to 0511
Section 11-3
g
range
00 to 15 (decimal)
Always 00. y
:
1 0
x 10
Bit FCS Terminator
: ↵
0
x 16
FCS Terminator
g
range
00 to 15 (decimal)
Always 00. y
Bit
( )
↵
Bit
( )
423