Omron SYSMAC C200HS Operation Manual page 413

Host Link Commands
Response Format
1
x 10 x 10
@
Node no.
Parameters
11-3-3 HR AREA READ –– RH
Command Format
1
x 10 x 10
@
Node no.
Response Format
1
x 10 x 10
@
Node no.
Parameters
11-3-4 PV READ –– RC
Command Format
1
x 10 x 10
@
Node no.
Response Format
1
x 10 x 10
@
Node no.
Parameters
408
0 1 0
x 16 x 16 x 16
R L
Header End code
code
Read Data (Response)
The contents of the number of words specified by the command are returned in
hexadecimal as a response. The words are returned in order, starting with the
specified beginning word.
Reads the contents of the specified number of HR words, starting from the speci-
fied word.
0 3 2
x 10 x 10 x 10
R H
Header Beginning word
code (0000 to 0099)
0 1 0
x 16 x 16 x 16
R H
Header End code
code
Read data (for number of words read)
Read Data (Response)
The contents of the number of words specified by the command are returned in
hexadecimal as a response. The words are returned in order, starting with the
specified beginning word.
Reads the contents of the specified number of timer/counter PVs (present val-
ues), starting from the specified timer/counter.
0 3 2
x 10 x 10 x 10
R C
Header Beginning timer/counter
code (0000 to 0511)
0 1 0
x 16 x 16 x 10
R C
Header End code
code
Read data (for number of words read)
Read Data (Response)
The number of present values specified by the command is returned in hexade-
3 2 1 0
x 16 x 16 x 16
Read data (1 word)
Read data (for number of words read)
1 0 3 2 1
x 10 x 10 x 10 x 10 x 10
No. of words
(0001 to 0100)
3 2 1 0
x 16 x 16 x 16
Read data (1 word)
1 0 3 2 1
x 10 x 10 x 10 x 10 x 10
No. of timers/counters
(0001 to 0512)
3 2 1 0
x 10 x 10 x 10
Read data (1 word)
Section 11-3
: ↵
FCS Terminator
0
: ↵
FCS Terminator
: ↵
FCS Terminator
0
: ↵
FCS Terminator
: ↵
FCS Terminator